21
CD Operation
Normal Playback
To start CD playback:
1. Press
the
FUNCTION
button to select “CD”
function
2. Load a disc into the player with the printed
label facing out.
• “
READING...
” will fl ash on the display as
the player reads the table of contents on
the disc. The unit will start playing the disc
automatically.
•
Playback will continue until all tracks on
the disc have been played, then the player
stops and the display shows the total tracks
number and playing time on the disc.
3. To stop playback at any time, press the
STOP
button.
NOTE:
The reading time may be longer if you are using
CD-R or CD-RW discs. This is normal and not an
indication of any problem with your unit.
To pause temporarily during CD playback:
• Press
the
PLAY/PAUSE
button.
•
The sound stops and the elapsed time
shows on the display, but the disc continues
spinning.
• Press
the
PLAY/PAUSE
button once more
to cancel pause mode and resume playback
at the same point.
To skip tracks and to search through music:
•
During playback, repeatedly press the
or
button to skip to higher or lower
numbered tracks. Playback will begin on the
selected track.
•
During playback, press and hold the
or
button to search within a track at high
speed to locate a specifi c musical passage.
• Release
the or
button when you hear
the desired passage. Normal speed playback
will resume at that point.
