3
Seebacher GmbH
www.seebacher.de
Phone: +49 (0) 80 41 / 77 77 6
Marktstrasse 57, 83646 Bad Tölz
Fax: +49 (0) 80 41 / 77 77 2
The module is intended for universal installation in boxes or
lamps. Extreme environmental conditions impair the function of
the product.
•
Protect module from shocks
•
Use module indoors only
•
Protect module from humidity
In addition to these safety instructions, you must also observe
the special safety instructions listed in the individual chapters for
the individual acts.
2.4. Qualification of staff
Assembly, commissioning, operation, maintenance, decom-
missioning and disposal may only be carried out by qualified
staff. Work on electrical parts may only be carried out by a trai-
ned electrician in accordance with the applicable regulations
and directives. Other activities in connection with the ISYGLT
module, such as assembly and installation of system compon-
ents with tested standard plug connections, as well as operation
and configuration of the ISYGLT module may only be carried out
by trained staff.
2.5. Changes to the product
Unauthorized modifications to the ISYGLT module which are not
described in this or the other applicable instructions can lead to
malfunctions and are prohibited for safety reasons.
2.6. Use of spare parts and additional equipment
The module may be damaged if unsuitable spare parts and
additional equipment are used. Only use original spare parts
and additional equipment from the manufacturer.
2.7. Liability notes
SEEBACHER accepts no liability or warranty whatsoever for
damage and consequential damage caused by non-compliance
with the technical regulations, instructions and recommendati-
ons. SEEBACHER shall not be liable for any costs or damage
incurred by the user or third parties as a result of the use of this
equipment, in particular improper use of the equipment, misuse
or malfunction of the connection, malfunction of the equipment
or connected devices.
SEEBACHER accepts no liability for printing errors.
2. Safety instructions
Observe the following general safety instructions when installing
and commissioning the device:
Assembly and installation of the ISYGLT module may only be car-
ried out by a qualified electrician. Other activities in connection with
the ISYGLT module, such as assembly and installation of system
components with tested standard plug connections, as well as ope-
ration and configuration of the ISYGLT module may only be carried
out by trained staff.
Observe the electrical installation regulations of the country in
which the device is installed and operated as well as its national
accident prevention regulations. In addition, observe internal com-
pany regulations (work, operating and safety regulations).
Before working on the ISYGLT module system, it must be
disconnected from the power supply and secured against
being switched on again. After completion of the assembly,
installation and maintenance work, an electrical check must
be carried out! Check all protective conductor connections
and the voltages at all connection plugs as well as at each
individual module slot.
2.1. Intended usage
The module is exclusively suitable for regulation (control) in con-
junction with ISYGLT system components.
Any other use is not
intended. The limit values stated in the technical data must not
be exceeded under any circumstances. This applies in particular
to the permissible ambient temperature range and the permis-
sible IP protection type. For applications with a higher required
IP protection type, the ISYGLT module must be installed in a
housing or a cabinet with a higher IP protection type.
2.2. Predictable mishandling
The module must not be used in the following cases in particular:
•
explosive area
When operating in explosive areas, sparking can lead to defla-
gration, fire or explosions.
2.3. Safe handling
This module corresponds to the state of the art and the recog-
nised safety regulations. Each device is tested for function and
safety before delivery.
Only operate this module in perfect condition in accordance with
the operating instructions, the applicable regulations and directi-
ves of the country in which the device is installed and operated,
and the applicable safety and accident prevention regulations.
