iSwag Phantom Plus IS-7205C, User Manual

Page: 6 / 64

Version IS7110C-061413-01 6
3. Touch Screen
The touch screen is easy and convenient to use.
You can use the touch screen in the following methods:
Single click: briefly touch the screen with your finger and then move away.
Click and hold: click the screen with your finger and hold for about 2 seconds.
Drag: click a certain icon on the screen and hold, then move your finger, the icon will
move accordingly.
To avoid damaging the screen, never put anything on it.
4. Using a Micro SD Card
Your device supports up to a 32GB storage card.
Insert the card into the card slot, and push it in with your finger until a “click” is heard.
Now the card is ready for use.
Removing Micro SD card
First, close all programs or files on the card. Click Settings → Storage → Remove SD
card → OK. Then press the card with your finger, and simply remove it when it is
ejected.
Avoid inserting and removing the card repeatedly in a short time, this may cause
damage to the card. We suggest you use name brand cards to ensure compatibility.
5. Getting Started
Charging the device
You may use the device while it is charging, but this may prolong the charging time.
To charge device: connect one end of the AC adaptor to the power outlet and the
other end to the Micro USB port on the device (it may take about 5 hours to fully charge
the device).
The battery icon will roll during charging, and when it is full (it will stop rolling),
please disconnect the AC adaptor.
Starting the device
Press and hold the power switch for 3 seconds and wait for system startup.
Wi-Fi settings
We suggest you configure your Wi-Fi network before using your new tablet, as many
functions require it to work normally.
1. Click Settings→ Wireless and Network
2. Switch the Wi-Fi on. The device will search for and list all available Wi-Fi networks. If
an icon is displayed, you need to enter the correct password to connect to that Wi-Fi
network.