Isuzu 2008 i290, Owner'S Manual

Page: 7 / 384

Power Seats
If the vehicle has power
seats, the controls used to
operate them are located
on the outboard side of
the seats.
To adjust the seat, do any of the following:
•
Move the seat forward or rearward by sliding the
horizontal control forward or rearward.
•
Raise or lower the front part of the seat cushion by
moving the front of the horizontal control up or down.
•
Raise or lower the rear part of the seat cushion by
moving the rear of the horizontal control up or down.
•
Raise or lower the entire seat by moving the entire
horizontal control up or down.
•
Use the vertical control to recline the seatback.
See “Power Reclining Seatbacks” under Reclining
Seatbacks on page 1-5 for more information.
Manual Lumbar
If your vehicle has this
feature, there is a knob
located on the outboard
side of the driver’s seat.
Turn the top of the knob toward the front of the vehicle
to increase lumbar support. Turn the top of the knob
toward the rear of the vehicle to decrease lumbar
support.
1-3
2008 - Isuzu 290/370 Owner Manual