Isuzu 2008 i290, Owner'S Manual

Page: 316 / 384

For extended cab models,
the jack and wheel blocks
are located under the
cover at the center of the
vehicle behind the front
seats. The vehicle has a cover if it is an extended cab. To
access the tools:
1. Move the seats forward
to access the cover.
2. Turn the wing nut on the cover counterclockwise to
remove it.
For crew cab models, reach under the rear seat to
access the jack and wheel blocks. To reinstall the
jack and wheel block assembly in the mounting
bracket, insert the tabs into the jack base by pushing
the blocks up into the assembly. The outer hole in the
jack base aligns with the tab on the bracket. When
reinstalling, make sure the jack is secure, but do not
overtighten the jack in the bracket.
Extended Cab
Extended Cab
5-74
2008 - Isuzu 290/370 Owner Manual