- 86 -
7. Click
“Advance…”
if CHAP information is needed.
8. Click
“OK”
. The status would be
“Connected”
.
9. Done, it can connect to an iSCSI disk.
The following procedure is to log off iSCSI device.
1. Click
“Details”
in
“Targets”
.
2. Check the Identifier, which will be deleted.
3. Click
“Log off”
.
4. Done, the iSCSI device log off successfully.
Figure D.5
E. Installation steps for large volume (TB)
Introduction:
iStarUSA iSCSI Series
are capable of supporting large volumes (>2TB). When
connecting iStarUSA iSCSI Storage to 64bit OS installed host/server, the
host/server is inherently capable for large volumes from the 64bit address. On
