- 50 -
3.6.6 Example
The followings are examples of creating volumes. Example 1 is to create two
UDVs sharing the same CV (global cache volume) and set a global spare disk.
Example 2 is to create two UDVs. One shares the global cache volume, and
the other uses dedicated cache volume. Set a dedicated spare disk.
Example 1
Example 1 is to create two UDVs in one VG, each UDV uses global cache
volume. Global cache volume is created after system boots up automatically.
So, no action is needed to set CV. Then set a global spare disk. Eventually,
delete all of them.
Step 1:
Create VG (Volume Group).
To create the volume group, please follow the procedures:
Figure 3.6.6.1
1. Select
“/ Volume config / Volume group”
.
2. Click “
“.
3. Key in a VG Name, choose a RAID level from the list, click
“
“ to choose the RAID PD slot(s), then click
“
“.
4. Check the outcome. Click “
“ if all setups are
correct.
5. Done. A VG has been created.
