- 61 -
time intervals:
1. Temperature sensors: 1 minute.
2. Voltage sensors: 1 minute.
3. Hard disk sensors: 10 minutes.
4. Fan sensors: 10 seconds . When there are 3 errors consecutively,
controller sends ERROR event log.
5. Power sensors: 10 seconds, when there are 3 errors consecutively,
controller sends ERROR event log.
6. LED status: 10 seconds.
Figure 3.7.1
3.7.1 SES configuration
SES
represents
S
CSI
E
nclosure
S
ervices, one of the enclosure management
standards.
“SES config”
can enable or disable the management of SES.
Figure 3.7.1.1
(Figure 3.7.1.1: Enable SES in LUN 0, and can be accessed from every host.)
The SES client software is available at the following web site:
SANtools:
http://www.santools.com/
