14
pressure, the three-phase dump load will stop discharging to
automatically recover battery charging. Then the image not
displayed.
LCD display in digital form
show
the parameters value.
Fuse burn
Fuse burn indicator light, when fuse burn, remind users
replace the fuse
.
Polarity Reverse
Polarity Reverse indicator light, when the battery polarity
reversed. Remind users properly connected to the battery.
3.
LCD display parameters browse
1
After plus electric
, s
ystem is in viewing conditions, LCD display battery voltage:
Battery XXX.XV.
2
In viewing conditions
,
press the front button of the case, will according to the
following order cyclic display parameters
.
Battery voltage
→
charge current
→
charge power
→
Wind turbine
v
oltage
→
Wind turbine charge current
→
Wind turbine power
→
Solar panel voltage
→
Solar panel charge current
→
Solar panel power
→
Battery voltage
.
ϱϨ
Attentions
We have taken full consideration of possibilities of occurring all kinds of accidents in
design of the machine and adopted relative protective measures. But there is no
perfect protective measure. Frequent use of some functions (e.g.: short-circuit
protection, battery reverse connection protection) can cause great damage to the
internal components of the machine. So, users shall not depend on these protective
measures. The following attentions are very important for prolonging the service life
of the machine:
1.
Failures can be caused by many main reasons, among which are exhaustion of
battery or battery group and poor contact.
●In the charging process, exhausted battery or poor contact of the battery can
cause over voltage or low voltage; Frequent unload and braking can lead to
