manualshive.com logo in svg

IST 18.BF200D, Manual, Page: 28 / 56

Share
Download
IST 18.BF200D Manual Download Page 28

18-28

18.

 

BF200D • BF225D • BF250D iST

®

RIGGING DIAGRAMS

MULTI-ENGINE NUMBERING

Push-Button Start and Power Trim/Tilt Panels

The connectors for the push-button start panel, power trim/tilt panel and main harness are labeled where 
multi-engine configurations are available. Panel harnesses are labeled with letters and the Control ECU 
harnesses are labeled with numbers. To correctly connect the panels to the correct engine, follow the 
instructions below and the rigging diagrams on the following pages. 

Twin-engine

Port (P) connects to engine 1 connector.
Starboard (S) connects to engine 2 connector.

Triple-engine

Port (P) connects to engine 1 connector.
Center (C) connects to engine 2 connector.
Starboard (S) connects to engine 3 connector.

Quad-engine

Port (P) on left panel connects to engine 1 connector.
Starboard (S) on left panel connects to engine 2 connector.
Port (P) on right panel connects to engine 3 connector.
Starboard (S) on right panel connects to engine 4 connector.

P

S

P

S

C

4

2

3

1

Summary of Contents for 18.BF200D

























































Reviews:

No comments