manualshive.com logo in svg

IST 18.BF200D, Manual, Page: 25 / 56

Share
Download
IST 18.BF200D Manual Download Page 25

18-25

18.

 

BF200D • BF225D • BF250D iST

®

10. Remove the connector suspension from the

stays and remove the dummy connector from
the main harness connector.
Connect the NMEA interface cable connector
to the main harness connector, and then
reinstall the connector suspension onto the
connectors. Install the connector suspension
onto the stays.

11. Route the NMEA interface cable through the

harness clip, and then route it through the
bottom edge of the electric parts case.

NOTICE

Ensure the NMEA interface cable is routed 
behind the panel indicator cable to prevent 
chafing.

12. Wrap, but do not tighten, the NMEA interface

cable and panel indicator cable with the
harness band clip, and then install the clip on
the fuel tube stay.
Position the panel indicator cable 5-1/2" white
mark so it aligns with the harness band.
Tighten the harness band clip, and then cut
the excess.

13. Ensure the panel indicator cable and the

NMEA interface cable are routed under the
shift link guide.

DUMMY 
CONNECTOR

CONNECTOR 
SUSPENSION

MAIN 
CONNECTOR 
HARNESS

NMEA 
INTERFACE 
CABLE 
CONNECTOR

STAY (2)

HARNESS 
CLIP

NMEA INTERFACE 
CABLE

ELECTRIC 
PARTS CASE

NMEA INTERFACE 
CABLE

PANEL INDICATOR 
CABLE

NMEA 
INTERFACE 
CABLE

HARNESS BAND 
CLIP

FUEL 
TUBE

Summary of Contents for 18.BF200D

























































Reviews:

No comments