Installation Instructions
(1)
General Bypass Installation
i.
Hold the knob or use a bypass tool to rotate the knobs. The water supply will be
bypassed
when the
knobs are
horizontal
.The bypass is in
service
when knobs are oriented
vertically
.When the bypass
is in service, users can take raw water and filter water samples for testing at the water taking port
on either side of the bypass.
ii.
Mount the meter sensor into the meter sensor mounting hole. This device handles meter and control
functions after connecting to the appropriate controller.
iii.
In case of equipment failure or other exceptional circumstances, the bypass can be adjusted to the
bypass position, allowing users to directly use tap water temporarily. After the failure or problem is
resolved, adjust the bypass to the vertical service position.
iv.
Users can adjust the Water Hardness Adjustment Nut to achieve their desired water hardness.
| (678) 261-7611 |
support@123filter.com
