MEASUREMENT AND ASSEMBLY MANUAL
Instruction validity: as of 1 August 2013
6
for wider roller blinds, four brackets (two pairs) are necessary, one in a distance of 15
–20 cm from each end and
the second in a distance of 50
–60 cm from the first one;
if possible, the distance from the wall depends on the bracket attachment method, i.e. the position of wedges:
o
front wedge:
52 mm
;
o
rear wedge:
100 mm
.
The following facts must be kept in mind:
installation of a bracket with wedges pointing toward the room minimises the distance between the upper box and
the rear wall, but the bracket is visible and not visually attractive;
installation of a bracket with wedges in the back is more aesthetically desirable, but requires at least 5 cm of
space between the back wall and the upper box.
Attach brackets (6) using screws and
components suitable for the type of structure
onto which they are to be attached (metallic
structure, window frame, wall, other material).
If three or more brackets are used, ensure
that the brackets are perfectly aligned
± 1 mm; this can be checked by sliding the
box along the cut-outs before tightening the
attachment screws.
Insert the upper box to the brackets and slide it lengthwise until it is centred within the window wing, and secure with
wedges
(7)
.
