Isoplam L030002, User Manual

Page: 8 / 28

8
6. Mounting and dismantling blades
and smoothing plate
· Warning! To manipulate carefully the blades to avoid damages and lesions.
It is obligatory to use the protection gloves against cuts.
· To switch off the motor (to disconnect the socket from the electric system).
·
Warning! To verify the springs connection "A" in the mounting of floating
blades and of smoothing plate, to avoid damages to the user (see the picture 04).
·
To loosen the tightening screws “B” with the proper key in the mounting of the
finishing and of the combination blades (see the picture 05).
·
To clean the blades pivots and the blades.
7. Security working instructions
·
The work place must be perfectly in order without risks and well-lit.
·
Warning! To remove the foreign persons from the neighbourhoods, before to
begin the levelling work.
· To wear always all proper protections, which spectacles, leather gloves, close-
fitting clothes, helmet and proper footwear to protect oneself against the sparks
and splinters of materials during the work.
·
In case of job in the places closed: like rooms, galleries, etc… To make sure that
there is sufficient air for the health, because the exhaust gas contain the carbon
monoxide (they can cause a consciousness leak and be mortal).
·
It is forbidden the use of machine in the places exposed to the explosions or with
dangerous products in the neighbourhoods.
Picture 04 Picture 05