ORIGINAL INSTRUCTIONS
5
COMMISSIONING
5.1
Running in
The first few hours of operation are essential to make the endothermic
engine and other moving parts arrange in their games with each other.
Therefore a prudent use policy is recommended, without using the
endothermic engine at high speeds.
5.2
Refuelling
The cap of the fuel tank is located above the tank
of the machine. The tank must be filled with
suitable fuel (unleaded petrol). The tank cap is
screwed: for opening you must rotate it counter-
clockwise (as shown in the figure), then remove
the cap.
After refuelling, screw, , the tank cap turning it clockwise and make sure
it is closed properly. At the start of the engine move away from fuel
tanks.
27
Refuelling
When refuelling, be careful not to spill the fuel. Spilled fuel or fuel
vapors may ignite. If fuel is spilled, wipe the affected part
immediately.
Danger of burns
During fuelling:
Turn off the engine.
Do not approach naked flames or other heat sources.
Do not smoke.
