ISOMAG MS 1000, Instruction Manual

Page: 4 / 12

2
MS1000 – SENSOR MANUAL
1000_EN_IT_IS_R0_PED
Before using the instrument, always make a sure connection to the ground
Avoid any attempt to repair the instrument. If the instrument is not
functioning properly, please call the nearest assistance service
Pay maximum attention during the operations
ATTENTION !!!
DANGER !!!
SAFETY
GENERAL INFORMATION ON THE SENSORS INSTALLATION
L
ifting sensors
The sensors with eyebolts must be
lifted by the method shown below.
The eye-bolt are measured to sustain
exclusively the weight of the meter
?
-
+
Before install the sensor locate the
direction of the liquid in the piping
The sign of the flow rate is positive,
when the flow direction is from – to +
as printed on the tag plate.
If after the installation, for plant request
becomes necessary reverse the sign of
the flow, it is enough reverse the sign
of the coefficient KA
f
Low direction
Centring cylinders