5A
Display
To show the various menus and the selected functions
LED
DMX
On
DMX input present
MASTER On
Master Mode
SLAVE
On
Slave Mode
SOUND
Flashing
Sound activation
Button
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
Only for remote control
Connecting with CA-8/CA-9/CA-9RTX to control the unit for Stand by, Function and Mode
function.
Mains input
Connect to power supply.
DMX input/output
For DMX512 link, use 3/5-pin XLR cable to link the unit together.
3.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by pressing the
ENTER
button and the display
will blink. Use the
DOWN
and
UP
buttons to change the mode. Once the required mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any
change press the
MENU
button again.
Hold and press the
MENU
button for about one
second or wait for one minute to exit the menu mode.
The main functions are showing below:
14A
4.4 DMX 512 Configuration
8 channel modes
：
