9A
Tilt Inversion
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
buttons to select the
(normal) or
(tilt inversion) mode. Once the mode has been selected, press the
ENTER
button to setup,
to go back to the functions without any change press the
MENU
button again.
Hold and
press the
MENU
button for about one second or wait for one minute to exit the menu mode.
Led Display
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
buttons to select the
(Led on) or
(Led off) mode. Once the mode has been selected, press the
ENTER
button to setup, to go
back to the functions without any change press the
MENU
button again.
Hold and press the
MENU
button for about one second or wait for one minute to exit the menu mode.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the
MENU
button to
show
on the display. Press the
ENTER
button to change to the mode
(display normal), It will automatically store after 8 seconds. Or press the
ENTER
button
again return to the mode
(display inversion). To go back to the functions press the
MENU
button. Hold and press the
MENU
button for about one second or wait for one minute
to exit the menu mode.
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Function Delay
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
button to select the
0
(No Delay) or
1/2/3
(Wait for
1/2/3 seconds before these Functions of 15/16 CH are activated/deactivated)
mode. Once
the mode has been selected, press the
ENTER
button to setup, to go back to the functions
without any change press the
MENU
button again. Hold and press the
MENU
button about
one second or wait for one minute to exit the menu mode.
10A
Dimmer Calibrate
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will blink. Use the
DOWN
and
UP
button to calibrate the dimmer for a maximum output
from
(limited to 50% of the really max. output) to
(maximum output is not
limited). Once the mode has been selected, press the
ENTER
button to setup, to go back to
the functions without any change press the
MENU
button again.
Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Self-Test
Press the
MENU
button to show
on the display. Press the
ENTER
button and the unit
will run self-test by built-in program. To go back to the functions press the
MENU
button again.
Hold and press the
MENU
button for about one second or wait for one minute to exit the menu
mode.
Temperature Test
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will show the temperature of the unit. To go back to the functions press the
MENU
button again. Hold and press the
MENU
button for about one second or wait for one minute
to exit the menu mode.
Fixture Hours
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will show the number of working hours of the unit. To go back to the functions press
the
MENU
button again. Hold and press the
MENU
button for about one second or wait for
one minute to exit the menu mode.
Software version
Press the
MENU
button to show
on the display. Press the
ENTER
button and the
display will show the version of software of the unit. To go back to the functions press the
MENU
button again. Hold and press the
MENU
button for about one second or wait for one
minute to exit the menu mode.