11
button again. Press and hold the
MENU
button for about one second or wait for one minute to
exit the menu mode.
Dimmer Calibration
To select the
Dimmer Calibration,
press the
ENTER
button to show
DIMMER CALIBRAT.
on the
display. Use the
DOWN
and
UP
buttons to adjust the dimmer from
50
to
100
, press the
ENTER
button to setup and store, to go back to the functions without any change press the
MENU
button
again. Press and hold the
MENU
button for about one second or wait for one minute to exit the
menu mode.
Auto Test
To select the
Auto Test
, press the
ENTER
button to show
AUTO TEST
on the display and the unit
will run a self-‐test. To go back to the functions press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for one minute to exit the menu mode.
Temprature
To select the
Temp
, press the
ENTER
button to show
TEMP.
on the display and the display will
show the temperature of the unit. To go back to the functions press the
MENU
button again.
Press and hold the
MENU
button for about one second or wait for one minute to exit the menu
mode.
Fixture Time
To select the
Fixture Time
, press the
ENTER
button to show
FIXTURE TIME
on the display and the
display will show the number of working hours of the fixture. To go back to the functions press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for one
minute to exit the menu mode.
Firmware Version
To select the
Firmware Version
, press the
ENTER
button to show
FIRMWARE VERSION
on the
display and the display will show the version of software of the unit. To go back to the functions
press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
Summary of Contents for iMove 350SR
