4-
2.1 Beam Angl
e
IM-200SR-ELC
IM-200SR-HID
3. Lamp
Lamp:
HID 150W
ELC 250W
1. Always switch off the main supply and never handle the lamp or luminaries when is
hot.
2. Do not touch the bulb with bare hands. If
this happens, clean the lamp with
denatured alcohol and wipe it with a lint
free cloth before installation.
3. Never operate the lamp without appropriate
shielding.
4. In case of replacement of the lamp or
maintenance, do not open the fixture within
15 minutes after switching the power off.
5. Make sure the lamp is located in the center
for the best spot.
In case of replacement of the lamp or maintenance, do not open the fixture
within 15 minutes until the unit cools down after switching off.
5-
3.1 HID 150W Lamp Installation Or Replacement
•
Always switch power off before installing or replacing the lamp. Never try to replace the
lamp when it is hot.
•
Do not touch the bulb with bare hands. Cleaning the lamp with denatured alcohol and wipe
with a lint free cloth when lamp is dirty.
1. Loose the screw on the housing cover.
2. Loose the screws of the lamp wire from terminator
3
.
Remove the old lamp from the fixture.
4. Please be care to install the lamp into case, make sure it wedge tightly that it can not
move easily. WARNING: impropriety install will cause the lamp lifespan shorten and
maybe explosion during operation.
5. Connect the lamp wire to the terminator as before.
6
.
Please reinstall step 2 and step 1.
