10
Assembly Instructions (cont.)
Through-Wall Accesses:
Gas Line Feed:
The provision for installation of a gas pipe
is only for connection to a decorative gas appliance or a gas
log lighter. The decorative gas appliance must comply with
standard for Decorative Gas Appliances for installation in
Vented Fireplaces, ANSI Z21.60. The decorative gas appliance
should be installed in accordance with the National Fuel Gas
Code, ANSI Z223.1.
Important:
If a gas burning decorative appliance is installed,
look for and only use an A.G.A. Certified Vent-Free Gas Log.
Anytime a gas fired appliance is in use it is recommended a
carbon monoxide detector be installed.
Gas line for gas log sets used in the Vent Free firebox
can be routed through the side wall, back wall or floor of the
firebox by drilling an appropriately sized hole using a masonry
drill bit.
Electrical Line Feed can be routed through the firebox
back wall, side walls or floor by drilling an appropriately sized
hole using a masonry drill bit.
Be sure to follow the gas log Appliance
Manufacturer’s explicit electrical line connection instructions
for vented masonry fireplace installations.
Note:
Gas Line and Electric Line must be fed through separate
access holes.
CAUTION:
All access holes must be grouted with mortar to
seal any gaps or cracks.
Firebrick
Side
Gas or Electric
Line
Typical placement of
gas or electric line
NOTE: Fill any gaps around
line with Earthcore Mortar
Summary of Contents for VF-36
Page 15: ...15 Notes ...