24
FIGURE 39
FIGURE 40
FIGURE 41
Step 12:
Cut one end of two of the smoke dome top large,
part 13, components at an angle parallel to the opposite end of
the piece. The bottom length of the cut piece should measure
23 3/4 ” (Figure 35).
Step 13:
Place one modified smoke dome large piece (haunch
cut off and a bottom length of 49-3/4" together with another
of the smoke dome large pieces that was angle cut to 23 3/4"
bottom length and parallel angle) together on the damper
support and flush with the back wall of the firebox so that
the two smoke dome pieces meet along their field modified
cut line.
The overall length of the two joined smoke dome
pieces should be 73-1/2". (Figure 36)
Step 14:
Repeat STEP 13 on the front damper support. Set
the front smoke dome components 2-3/4" back from the front
face of the front damper support (Figure 37).
Step 15:
Fit the top sloping smoke dome side wall components,
part 34, in place between the front and back smoke dome
arrangements at each end of the smoke dome (Figure 38).
Step 16:
Continue building the MAGNUM model 60 fireplace
smoke dome by cutting two of the smoke dome large pieces,
part 13, to a bottom length dimension of 39 3/4”. The slope
angle of the cut should match the slope angle of the end being
cut. (Figure 39)
Place one of the modified smoke dome large pieces
(39 3/4” bottom length) on top of and flush with the first tier
of smoke dome components at the back of the first course of
smoke dome. The haunched, un-cut end of this piece should
be flush with the haunch end of the first tier smoke dome
below it. (Figure 41)
Step 17:
Repeat this arrangement at the front of the smoke
dome.
Step 18:
Cut each of the remaining two smoke dome medium
pieces, part 11, at an angle cut that is parallel to the un-cut end
and so that its bottom length is 23 3/4” (Figure 40).
Step 19:
Place one of the angle cut smoke dome top medium
pieces at the front and one at the back of the first tier smoke
dome so that they meet the smoke dome large (cut to 49 3/4”
bottom length) already set in Step 11. (Figure 42)
Assembly Instructions - 60” (cont.)
39 ¾
”
REMOVE
FIGURE 42
