10
252_EN_IS_1_3_00.doc
Some functions in the converter are enabled by the access
codes. The information of this manual is related to all the
funct ions available wit h L2 level. All t he funct ions available
through higher level are protected and reserved to the
service.
Descript ion of t he L2 a cce ss code
(menu “ 11 I nternal data” pos. 11.1)
q
w i t h code L2 = 0 0 0 0 0
(wit h t his code only) you
disable the request of code L2
NOTE: t he availabilit y of t he funct ions is relat ed t o t he
selected block
q
*
w it h L2 cust om ised
(freely chosen by the user) you
can proceed programming all the functions up to L2
security level, entering its code whenever you enter the
Main menu
* ATTEN TI ON :
t ake not e very carefully of t he cust omised
code you have chosen, since there is no way for the user to
retrieve it if it is forgotten
The converter is delivered with access code L2:
1 1 1 1 1
and wit h t he " Quick st art menu" enable. Press t he key
to access to the "Quick start menu" from one of the
visualization pages
The “ Quick st art menu” may be set wit hout ent ering an y
access code (see example 1 on page 17).
FACTORY PRESETTI N GS
USER I NTERFACE
ML2 5 2
is available only in blind version, t herefore t he only w ay t o view and set
the functions of instrument it’s the serial interface I F2 2
ACCESS COD E
