24
25
1. this child seat must be used WITH the harness system for children weighing
between 0 kg and 18 kg. (from 0 to 4 years of age approximately).
2. Please read the instructions carefully, as incorrect installation could result in
serious injury. If any injuries should occur as a result of incorrect installation, the
manufacturer will accept no liability.
3. this is an IsoFIX cHIlD rEstraInt sYstEm. It has been certified under European
regulation EcE r44/04 for general use in vehicles fitted with IsoFIX anchorage
systems.
4. It may only be fitted in vehicles with certified IsoFIX anchorage systems (as indicated
in the owner manual for the vehicle), depending on the category of the child seat and
the device.
5. the IsoFIX weight group and size class for which the device has been designed are:
Group 0+, for children between 0 and 13 kg. Iso/r2, class D1 restraint system.
6. the IsoFIX weight group and size class for which the device has been designed are:
Group 1, for children between 9 and 13 kg. Iso/F2X, class B1 restraint system.
7. under no circumstances should the safety seat be installed in the front seat of the car
opposite the direction of travel if the car is equipped with an active airbag.
8. Please never use the safety seat without its cover or without the harness protectors.
9. Fastening a child dressed in outerwear could reduce the efficiency of the restraint system.
10. make sure to protect the child safety seat from direct sunlight as it could heat up and
hurt the child.
11. child seats or harness accessories that are damaged or have been used incorrectly
must be replaced.
12. Do not leave heavy objects inside the car, as these may injure the child in the event
of an accident.
13. make sure that the buckle is correctly fastened so that the child can be quickly freed
in case of emergency.
notice
IMPorTanT
Please read carefully BeFore
installing the child seat in the vehicle.
14. Ensure that no part of the child seat is caught in the door of the vehicle or in a reclining
seat. In addition, ensure that the safety seat is correctly installed and secured.
15. Do not disassemble, modify, or add any piece to the child seat or harness, as this
would seriously affect its basic functioning and the safety that the child seat provides.
16. the safety seat must remain installed in the vehicle with the safety belt, even if the
child is not seated in the child seat.
17. the child must never be left unattended while seated in the safety seat, not even
outside the vehicle.
18. If you are in any doubt as to the use or installation of the child seat, please contact
our customer services by c34 943 833 013.
19. Keep the safety seat away from corrosive products.
20. the manufacturer guarantees the quality of its products, but not the quality of
second-hand products or products belonging to other companies..
21. Instruction illustrations are for informational purposes only. the child restraint system
may contain small differences compared to the photographs or images in the instruction
manual. these variations do not affect its certification under EcE regulation r44/04.
General saFeTy WarnInGs
• Check carefully for the green round stickers as the indication where the right
positions to instal the child car seat on the Isoficx base, according to the manual
description.
• Check the seat is correctly locked on the Isofix base.
• Make sure the rebound bar is fully clicked into the Isofix base, when rearward facing
installation.
• Check that the Isofix connectors are fully locked into the vehicle’s Isofix anchorages.
• Make sure the child safety seat is locked in right recline position suitable for the child.
• Check the support leg touches the vehicle’s floor pan, showing the green
indicator before driving.
• make sure the child is correctly fastened by buckle harness system and the
shoulder pads are on the right shoulder height for the child.
Summary of Contents for AY-i122-ISOFIX
Page 5: ...8 9 4 2 4 3 4 5 4 4...
