www.MainResource.com
800 362-6740
Your source for Refurbished Isoetec Equipment
6 of 7
Paging
To page through the telephone speakers in the building:
•
Pick up your handset and dial the page zone number.
•
After a tone, make your announcement and replace the handset.
•
To answer a page, dial “65” before the paging party hangs up. You and the other
party will be connected and may talk privately.
Volume Control
Pressing the volume up and down keys until the desired volume is reached will set speaker
and handset volume.
Release Key
When programmed, the release key allows you to end a call by pressing the release key.
The Operator Station
In addition to the above capabilities, the operator station can:
1. Program system speed dial numbers
2. Transfer the system to night mode
3. Activate the DISA mode
4. Receive unanswered recall calls.
Program System Speed Dial Numbers
1. While the phone is on-hook, press the “*” key.
2. Enter 2 digits (01-50) for the code that will activate the desired speed dial number.
3. Enter an outside number of up to 16 digits
4. Press the “PROGRAM” key.
5. Use the volume up key to enter a pause.
Activate Night Mode
Press the programmed NIGHT key. All incoming calls will ring only at stations programmed
to ring at night.
DISA Activation
DISA (Direct Inward Station Access) is activated by dialing “*3” from the operator’s
terminal. Deactivate by pressing “*4”. When the DISA line is ringing and the DISA feature is
not activated, the line will ring as an incoming call. When the DISA line is ringing and the
feature is activated, it will not ring, but will show as a busy line on all phones except the
operator’s phone, where it will flash.
