www.MainResource.com
800 362-6740
Your source for Refurbished Isoetec Equipment
4 of 7
Station Call Back
•
Use the Station Call Back feature when you call an internal extension and get a busy
signal.
•
Press the “CB” key. Replace the handset or press the “HF” key if you are using
hands free mode.
•
If you used a DSS key to reach the extension, press the “CB” key.
•
When the extension is available, your station will ring and your call back key will
flash.
•
Lift the handset or press the HF key and then press the “CB” key.
•
To cancel, press “CB” while your phone is ringing and before you answer the call.
Outside Line Call Back
When you call an outside line and get a busy signal, use the Outside Line Call Back function.
•
Press the lighted “LINE” key of the line you want to use, followed by the “CALL
BACK” key.
•
When the line is available, your LINE key will flash and your phone will ring.
•
Lift your handset or press the LINE key.
Call Forwarding
•
Forward all calls directed to your station to another station using a preprogrammed
“FORWARD” key.
•
Call the extension you wish to forward your call to.
•
Press the “FWD” key.
•
Replace the handset.
•
To cancel, press the “FWD” key while your phone is on-hook.
Busy/No Answer Alternatives
Message Waiting
If you call an internal extension and you hear a busy signal or get no answer, leave a
message at the station by following these steps:
Press the “MSG” key if programmed, or press the “HOLD” key while you hear an internal
busy or ring back tone until you hear two short beeps.
To answer a message left at your extension, lift your handset or press the “HF” key and
press the “MESSAGE” or “HOLD” key. The phone of the person who left the message will
ring.
To cancel, press the “MESSAGE” or “HOLD” key.
