manualshive.com logo in svg

Iso ISOJET Cleaner 5, Operating Instructions Manual

Share
Download
Iso ISOJET Cleaner 5 Operating Instructions Manual Download Page 8

DEUTSCH

FRANÇAIS

ENGLISH

Attention!    

Avoid the inhalation of fumes. Ensure suffi cient air-fl ow!

Note!    

 

Dripping electrolytic solution can cause irreversible marks on marble  

 

 

 

or other delicate surfaces.

Glide the brush using a slight pulling motion, not pushing motion over the, to be cleaned weld.
More pressure only causes the brush to wear faster. Be aware that the current is doing the
work. Avoid scrubbing the brushing unit on the work piece.

Correct 

 

 

 

 

 

     

 

  Incorrect

Using this method, the result is not always visible immediately! 

Tipp:    

By wiping with a moist cloth, the result is quickly seen and removes excess  

 

 

 electrolyte solution.

Attention!    

Tighten only gently by hand.

 

 

 

Should the brush not have been in use for some time, screw off 

 

 

 

 

the brush and rinse thoroughly under water!

When using carbon brushes (Art. No. K12118) the following should be noted:

Summary of Contents for ISOJET Cleaner 5















Reviews:

No comments

Brands by name

Popular brands

Load more brands