DEUTSCH
FRANÇAIS
ENGLISH
Device Protection
• Make sure the attachments are properly attached (carbon brushes / electrodes).
• Tighten the carbon brushes / electrodes gently.
• Make sure that the mains plugs are plugged in properly. Check that the pipes are properly
• connected.
• Check the connecting pipes and cables regularly.
• Only use original accessories and chemicals.
• Do not open the devise. Protect it from any kinds of knocks and keep the Cleaner dry and
• frost free (chemicals).
Operation
The device is delivered tested and in good operating condition. Only the first carbon brush
needs to be attached. Remove the basic device and its accessories from the shipping carton
and the protective Polyäthylen covers.
Deposit the packing materials in the respective recycling bins. Take out the carbon brush from
the bubble pack. The rest of the replacement brushes and refill container ISO-JET ISOL C can
be stored in its original packaging for later as these are usually only required later.
Unwind the cable from the drum and connect the device according to the drawing. Should
the work piece not allow a direct attachment of the earth clamp, you can still get a connection
using a clamp or locking pliers etc. Avoid scratches on visible places.
Make sure that the mains cable voltage corresponds with that noted on the backside of the
device.
22. Only use tested extension cables.
23. Chemical Safety. Adhere to all the safety requirements, safety data sheets on the chemical
containers as well as the local safety requirements.
24. Do not leave the Cleaner switched ON with the brush in contact with the working table/plate
25. For connecting the Cleaner to a power supply grid, you must connect the Cleaner to a socket
protected by a fuse or a thermal-magnetic circuit breaker of rated current max 16A
Summary of Contents for ISOJET Cleaner 5
Page 13: ...DEUTSCH FRANÇAIS ENGLISH ...
