16
On the back of the base of the UVC Hunter trolley there is a removable panel, fixed with 4 screws, inside which
the electrical components that make up the trolley control system are located.
Back part
Rear panel fixing screws
Electrical control panel
Ballast lamps
Switch with 3.15A fuse
Timer
Hour counter
IR sensor
Relè
The relays used, even if similar in shape and size,
must not be exchanged for the different supply
voltages and the number of contacts that have been
defined.
CONNECTION TO THE ELECTRICITY NETWORK
WARNING !
the connection to the electricity grid must be made only by technical personnel with the neces-
sary skills
•
on systems certified and equipped with a declaration of conformity,
•
on systems protected with 6A differential magnetothermic switch
Before activating the switch located below the base of the appliance, make sure that:
- the data of the power line correspond to those on the plate of the equipment itself
- the lamps have been mounted correctly
- all components and accessories are correctly located in their place
WARNING!
IT IS STRICTLY FORBIDDEN TO TAMPER THE PRESENCE DETECTION SENSORS AS IT COMPROMI-
SES THE SAFETY OF PEOPLE AND ANIMALS.
Other technical notes
