Islandaire 6041210, Installation And Operation Manual

Page: 11 / 22

Technician Setup Menu
This thermostat has a technician setup menu for easy installer configuration. To set up the
thermostat for your particular application:
1. Press the Menu button.
2. Press and hold the Tech Set button for 3 seconds. This three second delay is designed so
that homeowners do not accidentally access the installer settings.
3. Configure the installer options as desired using the table below. Use the “+” and “-” keys
to change settings and Prev and Next keys to move from one step to another. Note : Press
the Done key to exit Tech Setup Menu.
Tech Setup Steps LCD Will Show Adjustment Options Default
Filter Change
Reminder
This feature will flash
a reminder after the
elapsed run time to
remind the user to
change the filter. A
setting of “OFF” will
disable this function.
You can adjust the
filter change reminder
from “OFF” to 2000
hours of fan runtime
in 50 hour increments.
Pair Transmitter and receiver
pair code
Press and hold “+” for
5 seconds until “LE”
is flashed, then release
Room
Temperature
Calibration
This feature allows the
installer to change the
calibration of the room
temperature display.
For example, if the
thermostat reads 70°
and you would like it to
read 72°, then select 2.
°F
You can adjust the
room temperature
display to read up to
3˚ above or below
the factory calibrated
reading.
°F
9
Technician Setup