Wall Locations
The thermostat should be installed approximately 4 to 5 feet above the floor. Select an area
with average temperature and good air circulation.
Subbase Installation
Horizontal Mount
Vertical Mount
1
2
For vertical mount, put one screw on the top
and one screw on the bottom.
For horizontal mount, put one screw on the left
and one screw on the right.
Installation Tip
Pick an installation location that is easy for
the user to access. The temperature of the
location should be representative of the
building.
Do not install
thermostat in locations:
• Close to hot or cold
air ducts
• That are in direct sunlight
• On an outside wall
• In areas that do not
require conditioning
• Where there are dead
spots or drafts (i.e., in
corners or behind
doors)
• Where there might be
concealed chimneys
or pipes
Installation Tip
Electrical Hazard
Failure to disconnect the power before
beginning to install this product can cause
electrical shock or equipment damage.
Mercury Notice
All of our products are mercury free.
However, if the product you are replacing
contains mercury, dispose of it properly.
Your local waste management authority can
give you instructions on recycling and proper
disposal.
2
Installation Tips
Summary of Contents for 6041206
Page 2: ......
Page 15: ...13 Specifications 3 86 1 1 1 2 375 4 72 3 00 1 75 1 125...
