background image

Lay out the float tube on a level area that is free of sharp objects.  Make sure that the  
warning labels are on top.  Your water trampoline has three chambers, turn the valve counter 
clockwise to fully open the valve, insert the pump stem. We recommend using an electric  
inflator or a shop vac

.

 

Tip: Any small plastic funnel can be fashioned to adapt the end of 

your shop vacuum’s hose.  If using compressed air do not exceed 2 PSI

.  

Quickly close the valve to prevent the air from escaping.

 

Fill each chamber 1/2 full, then 

continue filling the remaining chambers until full. The tube is full when you can make a 
small depression in the tube with your palm. It is normal for the air pressure within the tube 
to expand and contract depending on air and water temperatures. It may be necessary to    
increase or decrease the air pressure in your product accordingly in warmer regions.

 

On 15’ & 20’ trampolines you may need three people to  
complete this part. Each person will space themselves 
equally around the trampoline frame. Lift the trampoline 
frame and set it on top of the flotation tube. Be careful not  
to slide the trampoline frame over the float tube as it could 
cause a tear or rip to develop. Next position the frame on  
top of the black neoprene cradle. Once the trampoline is in     
position, strap the frame of the trampoline frame to the    
flotation tube.  Be sure the straps are securely fastened to  
the hardware. Check the frame straps after each use to      
assure the proper position on the tube. 
The final step is to install the spring pad and the ladder. Tie 
the spring pad around the trampoline frame. Use a double 
knot to prevent the spring pad from coming loose.  

Tip: slightly loosen frame from tube to secure tie if needed.  

Finally, apply 303 protectant to clean and protect your tram-
poline tube from weathering.  
DO NOT USE ARMORAL OR PRODUCTS THAT    
CONTAIN SILICONE OR PETROLEUM DISTILLATES. 
Now you are ready to launch, 3 people should be able to 
carry it using the handles around the tube. 

DO NOT DRAG 

your trampoline when launching.  

        WARNING 

DO NOT OVER INFLATE! 

Excessive pressure can cause the tube to rupture with          

potentially damaging force to eyes, ears, skin and limbs.            

Over inflation can rupture the tube beyond repair. 

 

Summary of Contents for Acrobat













Reviews: