9
Tube and Frame Assembly
Lay out the inflatable tube on a level area free of sharp objects. Locate the valve and
unscrew the cap. To open the valve, push down needle spring and rotate clockwise
(right).
The valve is OpeN when the spring is DOWN.
Butt your shop vacuum hose up
to the valve and inflate. Your tube is fully inflated when it is FiRm to the touch (about
2 PSi). Your hand should only make a slight depression when you push down on the
tube. Once your tube is firm, quickly push the needle spring down and rotate counter
clockwise (left) to pop it up to the closed position. Then screw back on the cap.
Inflating your tube can be done WITHOUT A VALVE ADAPTER.
YOU WiLL NEED TO TOP OFF YOUR TUBE FROm TimE TO TimE AS iT EXPANDS
AND CONTRACTS WiTH THE HEAT OF THE DAY.
inflate with shop vac or power inflator
For more information:
www.watertrampolines.com/ValveUse.asp
20' Acrobat and 25' Giant Jump Water
Trampolines have three valves to inflate
three separate chambers.
FILL EACH CHAMBER 1/2 FULL AND
THEN TOP OFF TO FULL TO AVOID
BLOWING OUT THE INTERNAL WALLS
.
if internal wall leakage exists between
chambers, it will not affect the use of the
product. Just continue to top off each
valve to keep the product FiRm.
Push in needle spring to the right to open and
left to close and place cap back on
We recommend using the metro magic
Air Blower Deluxe to inflate our larger
water trampoline products.
