SI2000 Ganymede 822+ Router User Guide
KSS5316B0-EDE-010
4/41
©
The con
ten
ts o
f this
docume
nt is
the
proper
ty o
f ISK
R
A
T
EL K
R
A
N
J,
SLOV
ENIA, and
may no
t be copied
, re
produ
ced
or
disclo
sed
to
a thi
rd p
arty wi
thou
t wr
itten
con
sen
t of the o
w
ner
4 Ethernet 10Base-T/100Base-T ports
Use a straight-through or crossover ethernet cable (
2.1.3Ethernet (UTP) cables
) to connect your
SI2000 Ganymede 822+ Router to a computer or any other device. Up to four devices can be
connected to the router without using external ethernet switch. It is possible to manage the settings
of the router with telnet connection using this port. The factory setting for IP address is 192.168.1.1.
AC power socket
Plug the power cable to ensure power to the SI2000 Ganymede 822+ Router.
1.2.2 Light
indicators
The following figure shows the front panel of your SI2000 Ganymede 822+ Router.
There are four LEDs on the front panel of the router that indicate the status of your SI2000
Ganymede 822+ Router. The description is given in table 1.
table 1: LEDs description
LED
Status
Description
PWR
on
Power on.
off
Power off or fatal malfunction.
The front panel of the SI2000 Ganymede 822+ Router
