Because of the extra resistance forces on the rolls while making conical bending the capacity
of the machine must be accepted half as usual therefore the max. bending thickness must be reduced
to half in conical bends. The conical bending is done by using the attachment on right side of the
machine and the tilting of the roll. Please refer to the drawing for a better idea of a conical bend.
Loosen bolts A
Detach B connection
Use the lift motor to tilt the bending roll D
Straightening the D Roll
To straighten the roll D after conical bending you must put straight materials ( E ) between
rolls F and D and reversing the operation above
A
B
DETAIL 1
Roll D
