ISHIDA WPL-3000, Service Manual

Page: 40 / 134

WPL-3000 SERVICE MANUAL 0077B
3-16
Test Mode 3
All IF-21FD operations are controlled from the WPL-3000.
Send (C99-02-02)
This sends data from WPL-3000 to
IF-21FD.
Enter selection number of the
data to be sent and press
ENTER .
Press PRINT to begin sending.
Note: Select number using
➝
key.
Receive (C99-02-03)
This receives data from IF-21FD to
WPL-3000.
Enter selection number of the data to
be received and press ENTER .
Press PRINT to begin receiving.
Note: Select number using
➝
key.
Before using a new floppy disk for the first time, perform Step C99-03 to
format the disk. Use 2DD type disks only.
CAUTION CAUTION
3.2.13.1 Data Transfer
Select IF21 File No. (C99-02-01). Enter
the IF-21FD file number (1~8) to be used,
then press ENTER .
Note
: 1
. Master File contains all data programmed in Registration Mode.
E
2
ROM File contains all configuration setting changes made in Setup
and Test Modes.
2. Master File contains file numbers 4-9 and 12-21.
3. E 2 ROM file contains file numbers 10 (Label Format) and 11 (Setup File).
IMPORTANT: When upgrading firmware or transferring files from one model to an-
other,
DO NOT load 11: SETUP FILE . This file is incompatible and
will cause unintended configuration settings.