ISHIDA BC-4000, Service Manual

Page: 25 / 142

Chapter 2 SETUP MODE
BC-4000 Service Manual No. 085-6693-02 2-9
4. Select the desured unit number using the [
½
] or [
¾
] key.
or
0:Y AXIS POSITION (0055)
b01-02-02 1n31 0
or
0:X AXIS POSITION (0019)
b01-02-02 0n01 0
5. Key in the print position data (axis value) in 0.1mm units and press the [ENTER] key.
Note: Print position data cannot be changed for standard format #1 through #4.
¨
6. Press the [END] key to return to the B01-02-01 menu.
Æ
FORMAT No. + [PLU] (30)
b01-02-01 FORMAT No 30
2.2.2.3 B01-02-03 Default PLU Number
Operation
1. Press the [
¾
] key twice to enter 01-02-03 menu.
Æ
DEFAULT PLU [ENTER]
b01-02-03 PLU 00000001
2. Key in the desired PLU number and press the [ENTER] key.
Example: PLU number “2”
¨
Æ
DEFAULT PLU [ENTER]
b01-02-03 PLU 00000002
3. Press the [PRINT] key to issue a test label to confirm print position for eack print unit.
2.2.2.4 Returning to B01-02-01
Operation
Press the [END] key to return to B01-02-01 menu.
Æ
FORMAT No. + [PLU] (30)
b01-02-01 FORMAT No 30