ISHIDA BC-4000, Service Manual

Page: 24 / 142

Chapter 2 SETUP MODE
2-8 BC-4000 Service Manual No. 085-6693-02
2.2.2.1 B01-02-01 Label Format Copy
Operation
1. Press the [ENTER] key to enter B01-02-01 menu.
Æ
FORMAT No. + [PLU] (30)
b01-02-01 FORMAT No 30
2. Key in the desired label format number (copy destination) and press the [PLU] key.
Example: Label format number “50”
¨
Æ
FORMAT No. + [PLU] (50)
b01-02-01 FORMAT No 50
3. Key in the desired label format number (copy origin) and press the [COPY] key.
Example: Label format number “2”
¨
Æ
FORMAT No. + [PLU] (02)
b01-02-01 FORMAT No 02
Note: Format #1 thorugh #4 are standard label formats and cannot be changed.
For format # 31 thorugh #99, edit the format after copying a standard format.
2.2.2.2 B01-02-02 Print Position Data
Printing position can be set for each unit.
Operation
1. Press the [
¾
] key to enter B01-02-02 menu.
Æ
UNIT [ENTER]
b01-02-02 UNIT
2. Press the [ENTER] key to proceed to the next step.
0:X AXIS POSITION (0552)
b01-02-02 0n00 0
3. Select “1” (Y axis) or “0” (X axis) using the [
»
] or [
¼
] key.
or
0:Y AXIS POSITION (0490)
b01-02-02 1n00 0
0: X axis
1: Y axis
Unit number (1-22)
Print position
(in 0.1mm units)