6
3
To Use the Device for Taking Photos
3.1
Enter the Photo Mode
Turn on the device and it will enter Photo Mode by default, and
icon will appear
on the upper left corner of the screen
(
refer to 3.5
).
3.2
Taking photos
Follow the below procedure to take your photos:
1.
Use the screen to view your subject.
2.
Use Up/Down buttons to zoom in /out on your subject. The value of
magnification level is shown on the screen (x1~x8).
3.
Press Shutter button to take a picture.
4.
After the photo is taken, the screen will display the image for a brief second.
5.
The memory capacity on the upper right corner of screen will decrease by 1.
3.3
Using Self-Timer Function
You can use the self-timer function when you want to take a photo of yourself or
when you want to take a photo of an object when the camera must be as still as
possible.
1.
Turn on the camera, and make sure it is in Photo Mode (refer to 3.1).
2.
Press Left button to enable the self-timer. Press Left button again to change the
self timer setting among 2s, 5s and 10s.
Icon
Title
Illustration
2 seconds
Photo will be taken 2s after the shutter is pressed.
5 seconds
Photo will be taken 5s after the shutter is pressed.
10 Seconds
Photo will be taken 10s after the shutter is pressed.
3.4
Using the Flash
The flash is not only for taking photos in dim lights, but also for the subject in shade
or with backlight conditions.
1.
Turn on the camera, and make sure it is in Photo Mode (refer to 3.1).
2.
Press Right button to enable the Flash. Press Right button again to change the
flash between auto flash and full flash.
Icon
Title
Illustration
Auto flash
Flash fires automatically when shooting conditions
require extra lighting.
Full Flash
Flash fires every time you take a photo, regardless
of lighting conditions.
Flash Off
The flash is disabled.
