19 - 23
3 General information
3-1 Control panel
7.
Lubrication time setting knob
8.
Intermittent time setting knob
9.
FEED button
10.
Error indicator light (Red)
11.
Intermittence indicator light (Green)
12.
Lubrication indicator light (Orange)
(Fig.10)
3-2 Lubrication time
The orange light powers on when lubrication(Fig.10). Use lubrication time setting
knob to set oil time, of which the range is 2~180 sec. When the knob returns to zero, the
time is 2 sec.
3-3 Intermittent time
Two start modes: lubrication mode & intermittence mode.
Lubrication mode: Start lubricating first after power on. Because the oil may not
evaporate or be lost when it is not running for a long time on the machine, the start-up
lubrication mode can avoid damage caused by the above situation. When lubricant is
nor running on the machine for a long time, the lubricant may be lost. Lubrication mode
can avoid the damage caused by this.
Intermittence mode: Start from intermittent time after power on, which is factory
setting.
YET-R intermittent time:1~180 min. When the intermittent time settign knob
returns to zero, the time is 30 sec. When turn the knob, the green light on.
Warning! The general error of setting time is about ±20%.
Warning! Intermittent time must be more than 5 times of the lubrication
time.3 mins Min. intermittent time is suggested.
