ISGM LP-700, User Manual, Page: 12 / 20

12
DMX control
LP-700 LED Pixels can be controlled using any DMX512-compatible DMX controller that supports the size of your
installation. We recommend the use of a controller that has pixel mapping functionality.
About DMX
Each individual LP-700 LED Pixel can be controlled
using signals sent by a DMX controller over three
channels The first channel used to receive data from a DMX control device is known as the DMX address. Each
LP-700 LED Pixel sets its own DMX address automatically. The first LP-700 LED Pixel is set to DMX address ‘1’, and
the next pixel sets itself to ‘4’, and so on in increments of three channels per pixel. For example, if an LP-700 LED
Pixel has a DMX address of 7, then it uses channels 7, 8 and 9. The following pixel in the DMX chain will have a DMX
address of 10. It is not possible to otherwise manually set or force the DMX address of an individual LP-700 LED
Pixel.
DMX protocol
LP-700 LED Pixel - 3 channel DMX - RGB
Channel Value Percent Function
1 0-255 0-100 Red 0-100%
2 0-255 0-100 Green 0-100%
3 0-255 0-100 Blue 0-100%