ISGM LP-700, User Manual, Page: 10 / 20

10
Installing an LP-700 LED Pixel strip
The LP-700 system can be installed in any orientation.
1. Affix each rail to a flat surface using 4 mm (0.2 in.) countersunk screws.
The distance between the center of parallel rails is the pitch distance.
The distance between pixels (
pitch
) on a single strip is also
determined by the width (L) of cover that is inserted between each
pixel on the strip. Covers are available in four lengths:
Width (L) Pitch
20 mm (0.8 in.) 60 mm (2.4 in.)
40 mm (1.6 in.) 80 mm (3.1 in.)
60 mm (2.4 in.) 100 mm (3.9 in.)
80 mm (3.1 in.) 120 mm (4.7 in.)
click
PITCH
L