
11
2. Place the LP-700 LED Pixel strip on the rail. Note that the arrow on the
back of each pixel indicates the direction away from the power supply.
3. Affix the LED Pixel strip by placing a cover over the cable between two
pixels on the rail and pressing until you hear an audible “click”. Any
excess cable can be folded under the pixel.
4. Place a cover between each pixel on the rail to ensure that the pitch is
maintained and to hold the LP-700 LED PIxel strip in place.
5. Place end caps at each end of the rail. Two types are available: the first
is secured using a 4 mm (0.2 in.) countersunk screw, while the second
type can be secured using a contact adhesive.
6. Ensure that any wires from the power supply are threaded through the
holes provided. Any extra cable at the end of a rail can be folded back
under the last LED Pixel.
click
Summary of Contents for LP-700
