K250 / SD250 Operating Manual
3.8
Operating the Zoom Feature
The Zoom feature allows the user to zoom in to the scene using x2 magnification.
1)
Press and release the red button to
cycle between x1 and x2 magnification.
2)
X2 – indicates which magnification the
thermal imager is currently using.
3)
Capture an image in any magnification
using the instructions described in
Section 4.3.
CAUTION
Care should be taken when using the zoom feature in a firefighting situation due to a risk the
user could become disoriented. The user should not deviate from following their standard
operating procedures.
3.9
Video Capture
Information
The Video Capture feature is optional and therefore the following instructions may not apply.
Video Capture can be used when in Normal Imaging Mode or when using the Zoom feature.
To Switch On/Off
1)
From Main Menu, highlight the Record
symbol.
2)
Press the Yellow button to switch On and
repeat to switch Off.
To Capture a Still Image
1)
Press the Yellow button.
2)
The Capture symbol is displayed.
3)
The LED lights red momentarily.
© 2014, Infrared Systems Group Ltd.
Page 12 of 20
K01 POM 007A -67
