Turned tool changing station SK11 and SK20
27
/
27
April 2019
9
Declaration of Incorporation for (partly completed) base machines
Declaration of Incorporation in accordance with EC Machinery Directive 2006/42/EC, Annex II B
The manufacturer
isel
Germany AG
Bürgermeister-Ebert-Straße 40
D-36124 Eichenzell
hereby declares that the following product:
Turned tool changing station SK11 and SK20
Product designation:
Item-No.: 239100 4900 (SK11), 239100 6630 (SK20)
conforms to the requirements of the Directive identified above, including the applicable amendments
at the time of the declaration.
The following harmonised standards have been applied:
EN ISO 12100:2010
Safety of Machinery - Safety of machinery -- General principles for design --
Risk assessment and risk reduction
EN ISO 13850:2015
Safety of machinery -- Emergency stop -- Principles for design
EN 60204-1:2006
Safety of machinery. Electrical equipment of machines
- Part 1: General requirements
The following additional EU Directives which are relevant for this product were applied:
EMC Directive
2014/30/EC
Low Voltage Directive
2014/35/EC
The
special
technical documentation
for this machine has been compiled in accordance with Annex
VII, Part B. The manufacturer is obligated to electronic submission of this technical documentation to
the national competent authorities upon request.
Person authorised
to compile the technical documentation:
Christian Bley (CE coordinator, isel
Germany AG)
The product (partially completed machine) is intended for incorporation into a machine or combination
with other partially completed machinery to form a machine in the sense of
Machinery Directive
2006/42/EC
, Article 1, Section (1), Letter a.
The commissioning of the compete machine (product) is prohibited until the machine into
which this product has been incorporated or of which it is a component complies with the
provisions of all relevant directives (particularly Machinery Directive 2006/42/EC) and this
(complete) machine has been provided with a CE mark.
place, date:
Eichenzell, 21 June 2016
______
________________
Werner Kister, chair
