isel Germany AG
About these assembly instructions
Abbreviations
MD
= Machine Directive 2006/42/EG
LEZ
= Linear unit with toothed belt drive
AC
= Alternating Current, AC servomotor (always synchronous motor)
BDC
= Brushed DC, brush type Direct Current (DC) servomotor
BLDC = Brushless DC servomotor
PDF
= Portable Document Format
Terminology
In these assembly instructions, "Product" always means linear unit with toothed belt drive.
Symbols used
In these instructions you will find various symbols which are there to alert you to important information /
facts and hazards:
Symbol
Signal word
Meaning
Danger
Warning of possible serious to fatal injuries to persons
Caution!
Fatal Voltage!
The lightning symbol is a clear warning of danger from electric
current!
Failure to heed this warning can lead to personal injuries with fatal
consequences.
Warning, caution!
Warning of possible minor injuries to persons, of possible faults or
destruction of the product or possible damage to property.
Failure to take account of the circumstances indicated by this
symbol (text, picture or table) can result in serious damage to
property.
Important
information or
piece of advice
This is important information or a piece of advice on the functioning
of this product.
Observing the safety instructions
Before commissioning the axis system (as a partly completed machine), working with it or making any
additions or modifications to the electrical installation of the linear units, it is essential that you carefully
read:
the safety guidelines in these assembly instructions
the safety guidelines for electric drives and control systems in the instruction manual of the
positioning module, drive controller, drive module or drive control used.
Copyright
©
isel
Germany AG, January 2013
All rights reserved.
Although every care has been taken to avoid printing errors and mistakes, these cannot be ruled out.
We would be grateful for any suggestions for improvements or information on possible mistakes or
unclear formulation of facts and illustrations.