OPERATION
43
PTO Operating Controls
FIG. 4-13:
Rear PTO and mid PTO are both controlled
by PTO clutch lever, 1.
Rear PTO selector lever, 2, is used to select position
of rear PTO drive gears.
To select rear PTO
- Make sure PTO clutch lever, 1, is
OFF and then move rear PTO selector lever, 2, rear-
ward to “540” position to engage gear.
To engage PTO
- Move the PTO clutch lever forward.
NOTE: When the PTO clutch is engaged, reduce
engine speed.
To disengage PTO
- Move the PTO clutch lever
backward.
Mid PTO selector lever, 3, is used to select position of
mid PTO drive gears.
To select mid PTO
- Make sure PTO clutch lever,
1, is OFF and then move mid PTO selector lever, 3,
backward to “2000” position to engage gear.
To engage PTO
- Move the PTO clutch lever forward.
NOTE: When the PTO clutch is engaged, reduce
engine speed.
To disengage PTO
- Move the PTO clutch lever
rearward.
NOTE: Rear and Mid PTO can be operated at the
same time or independent of each other.
1
2
3
FIG. 4-13
Summary of Contents for TXG237
