1.8.3 Return conductor connection (Device GPS 300W und 800W)
If the short-circuit bridge (see Figure 10: Example illustration of the short-circuit bridge) is not installed, an additional conductor
with a cross-section of at least 1.5 mm² must be used as the return conductor. This is connected to the "0V" connection. The
potential difference between the connection "0V" and the protective conductor can be up to ± 400 V.
For potential differences of > l 400 l V between "0 V" and protective conductor, these connections are short-circuited via an
electronic protective circuit to prevent damage to the device.
1.8.4 Interface connection
see 3 Remote control via interface.
GPS High Voltage Power Supply Series | Last change: 10.01.2020 |
www.iseg-hv.com
27/40
