11.3.3.
WiFi configuration
The WiFi configuration sets the wireless network properties provided by the iCS hardware access point (optional). Generally the
WiFi function can be disabled using the WiFi support switch. The IP address of the WiFi is fixed, so once connected with a iCS WiFi
the IP stays always the same.
WIFI FACTORY DEFAULTS
IP (fixed)
192.168.1.1
SSID
iseg-iCS2_[HARDWARE SERIAL-NUMBER ]
Channel
5
Password
password
11.4. Users / roles configuration
Users of iCScontrol can be added, edited and removed in the users section. Users of iCScontrol can be added, edited and
removed in the users section. Users can be assigned roles, such like admin, user etc. One or more users can be selected by
editing a role.
USER DEFAULTS
User
admin
Password
password
Role
admin
11.4.1.
Access control lists (ACL)
With the access control list rights to grant or forbid control on special objects for principals (roles or users) is managed. This gives
a powerful tool for very detailled right mechanism.
INFORMATION
INFORMATION
Note: Users, roles and ACL are only applied for user authentication for applications and services, which are
based on iCSservice. These are iCScontrol, iCSconfig, isegControl, SOAP and HTTP API.
isegHAL based services should implement own security mechanisms.
11.4.2.
SSH access
The ICS2 Linux host system can be fully accessed as root user using a encrypted SSH shell access over port 22.
This enables user to install own services or freely configure, e.g.EPICS plugins etc.
INFORMATION
INFORMATION
The local filesystem is divided into a system and a user data partition. To make changes on the readonly
mounted system part use the following command:
mount / -o remount,rw
Crate Controller CC24/CC23 | Last change on: 14.04.2020 |
www.iseg-hv.com
26/44
