ISC RP037, General Instructions For Use, Page: 5 / 44

5
PULLEY
Pulley Series: Issue E - Nov 2021
Information Icons
1. Read Instruction manual 7. Max temperature of water for cleaning
2. Inspect 8.Lubricate using light oil
3. No alterations or additions without manufacturer 9. Store in a clean, dry environment
consent 10 Location of EU Declaration of Conformity
4. Temperature range 11. OK to use
5. Keep away from chemicals or corrosive substances 12. Risk of injury
6. Dry naturally 13. Danger, risk of death
8. Part Code
9. User Manual Icon
10. CE Mark and Notified Body number
11. Tamperproof Axle Rivet
12. Maximum Breaking Strength
13. UKCA marking and Approved Body number
14. UK, LL57 4YH (where marked) - address of
manufacturer
[A] Nomenclature
1. Main attachment eye
2. Pulley Wheel / Sheave
3. Bearing (a) / Bushing (b) indicator mark
4. NFPA
5. EN12278:2007
6. Maximum Rope Diameter
7. Serial Number YY-Year BB-Batch NN-Number
[B] Care and Inspection
P
ulleys should be inspected for damage to the side frames and sheaves. Sheaves should be free to rotate
smoothly
[C] Use
1. Pulley can be used inline with direction of pull
2. Pulley can be used to redirect line
3. Attachment of EN362 connector to pulley with both side frames in the closed position
4. Use only ropes that are certified to EN1891A, EN892, EN564, NFPA 17ED ‘G’, or NFPA 17ED ‘T’
[D] Misuse
1. Do not use ropes that exceed the maximum rope diameter stated on the pulley
2. Do not use wire cables in conjunction with aluminium pulleys as this will increase wear. ISC recom-
mends the use of pulleys with stainless steel frames and wheels for this purpose
3. Do not use pulleys detailed in this manual in negative rigging applications
4. Do not use more than one rope per sheave
5. Pulleys should not be loaded across the minor axis or against the axle
Multiple Attachment Pulley E